Permit Requirements for Perry Park, Kentucky
For Plumbing projects in Perry Park, determining the correct permitting authority depends on whether the project site is located within the incorporated city limits or in an unincorporated area of Owen County.
Authority Having Jurisdiction (AHJ)
Most jurisdictions require permits for Plumbing work to ensure safety and code compliance. The governing body responsible for issuing these permits varies by specific location:
General Plumbing Guidelines
Permits are usually required for new installations, structural modifications, or major repairs. While minor maintenance or cosmetic updates may be exempt, landowners should always verify local codes before work begins.
Help Us Improve This Guide
If you have found a direct link to a permit portal or a specific local ordinance for Plumbing in this area, please submit an update.
Because Perry Park is located within Owen County, the following broader county regulations may also apply to your project:
Kentucky, Owen County Plumbing Permit Regulations and County Ordinances for Unincorporated Areas
Plumbing permit requirements in Owen County, Kentucky, are primarily governed by the Kentucky State Plumbing Code, which is based on the International Plumbing Code.
County-Level Jurisdiction
Owen County has a Building and Planning Department responsible for issuing building permits for commercial and residential buildings, as well as electrical and demolition permits. They also conduct building plan checks and inspections. For plumbing-specific matters, the county has a designated Plumbing Inspector, John "Tom" Parrish, who can be contacted through the Owen County Health Department.
Rules for Unincorporated Areas
For properties in unincorporated areas of Kentucky, including Owen County, plumbing permit applications and inspections are handled by the state's Department of Housing, Buildings and Construction (DHBC) through its regional offices if a local jurisdiction does not have its own building department. However, Owen County does have a Building Inspector, Scott Allnutt, who can be contacted for building permits. The Kentucky Plumbing Code applies to all new construction, renovation, and replacement work involving potable water supply, drain-waste-vent (DWV) systems, gas piping, and sanitary drainage.
A plumbing permit is required for:
- All new plumbing installations.
- Any existing plumbing installation where a fixture, soil, waste opening, or conductor is moved or relocated.
- New or replacement house sewers.
- New or replacement water services.
- The addition of a backflow prevention device to an existing water service.
- New water heater installations or replacements.
- Each individual unit of a multistory building if there is more than one unit.
- Buildings considered separate if they do not share a connected roof or if the connecting portions are not integral to the structure.
Permits are generally not required for the repair of leaks, cocks, valves, or for cleaning out waste or sewer pipes.
Homeowners can obtain a permit to perform plumbing work in their own personal residence, provided they meet specific requirements, including applying before work begins, performing all work themselves, and adhering to the state plumbing code.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Kentucky:
Kentucky Plumbing Legislation, Codes, and Guidelines
Kentucky Plumbing Statutes and Codes
Plumbing in Kentucky is primarily governed by Kentucky Revised Statutes (KRS) Chapter 318, which establishes the legal framework for the practice of plumbing, licensing requirements, and the authority to promulgate the state plumbing code. The technical standards for plumbing installations, materials, and methods are set forth in the Kentucky State Plumbing Code, which is codified under 815 KAR Chapter 20 of the Kentucky Administrative Regulations.
Unlike some other building codes that may adopt a specific edition of the International Plumbing Code (IPC) by reference, the Kentucky State Plumbing Code is a distinct set of regulations developed and maintained by the state. While it incorporates industry standards, it is specifically promulgated by the state department to address local, climatic, and regulatory conditions within the Commonwealth.
Regulatory Agencies
The primary state agency responsible for the administration, oversight, and enforcement of plumbing standards and licensing in Kentucky is the Department of Housing, Buildings and Construction (DHBC), specifically through its Division of Plumbing. This division is responsible for:
- Issuing and renewing licenses for master and journeyman plumbers.
- Reviewing and issuing plumbing construction permits.
- Conducting inspections to ensure compliance with the Kentucky State Plumbing Code.
- Administering the state plumbing examination through the State Plumbers Examining Committee.
While the DHBC maintains state-level authority, certain local jurisdictions may be authorized to administer and enforce the state plumbing code within their boundaries, provided they adhere to state regulations and employ qualified inspectors.
Resources to Learn More